In [1]:

```
%pylab inline
%matplotlib inline
# import all shogun classes
from modshogun import *
```

PCA is a useful statistical technique that has found application in fields such as face recognition and image compression, and is a common technique for finding patterns in data of high dimension.

In machine learning problems data is often high dimensional - images, bag-of-word descriptions etc. In such cases we cannot expect the training data to densely populate the space, meaning that there will be large parts in which little is known about the data. Hence it is expected that only a small number of directions are relevant for describing the data to a reasonable accuracy.

The data vectors may be very high dimensional, they will therefore typically lie closer to a much lower dimensional 'manifold'. Here we concentrate on linear dimensional reduction techniques. In this approach a high dimensional datapoint $\mathbf{x}$ is 'projected down' to a lower dimensional vector $\mathbf{y}$ by: $$\mathbf{y}=\mathbf{F}\mathbf{x}+\text{const}.$$ where the matrix $\mathbf{F}\in\mathbb{R}^{\text{M}\times \text{D}}$, with $\text{M}<\text{D}$. Here $\text{M}=\dim(\mathbf{y})$ and $\text{D}=\dim(\mathbf{x})$.

From the above scenario, we assume that

- The number of principal components to use is $\text{M}$.
- The dimension of each data point is $\text{D}$.
- The number of data points is $\text{N}$.

We express the approximation for datapoint $\mathbf{x}^n$ as:$$\mathbf{x}^n \approx \mathbf{c} + \sum\limits_{i=1}^{\text{M}}y_i^n \mathbf{b}^i \equiv \tilde{\mathbf{x}}^n.$$

- Here the vector $\mathbf{c}$ is a constant and defines a point in the lower dimensional space.
- The $\mathbf{b}^i$ define vectors in the lower dimensional space (also known as 'principal component coefficients' or 'loadings').
- The $y_i^n$ are the low dimensional co-ordinates of the data.

Our motive is to find the reconstruction $\tilde{\mathbf{x}}^n$ given the lower dimensional representation $\mathbf{y}^n$(which has components $y_i^n,i = 1,...,\text{M})$. For a data space of dimension $\dim(\mathbf{x})=\text{D}$, we hope to accurately describe the data using only a small number $(\text{M}\ll \text{D})$ of coordinates of $\mathbf{y}$. To determine the best lower dimensional representation it is convenient to use the square distance error between $\mathbf{x}$ and its reconstruction $\tilde{\mathbf{x}}$:$$\text{E}(\mathbf{B},\mathbf{Y},\mathbf{c})=\sum\limits_{n=1}^{\text{N}}\sum\limits_{i=1}^{\text{D}}[x_i^n - \tilde{x}_i^n]^2.$$

- Here the basis vectors are defined as $\mathbf{B} = [\mathbf{b}^1,...,\mathbf{b}^\text{M}]$ (defining $[\text{B}]_{i,j} = b_i^j$).
- Corresponding low dimensional coordinates are defined as $\mathbf{Y} = [\mathbf{y}^1,...,\mathbf{y}^\text{N}].$
- Also, $x_i^n$ and $\tilde{x}_i^n$ represents the coordinates of the data points for the original and the reconstructed data respectively.
- The bias $\mathbf{c}$ is given by the mean of the data $\sum_n\mathbf{x}^n/\text{N}$.

Therefore, for simplification purposes we centre our data, so as to set $\mathbf{c}$ to zero. Now we concentrate on finding the optimal basis $\mathbf{B}$( which has the components $\mathbf{b}^i, i=1,...,\text{M} $).

To find the best basis vectors $\mathbf{B}$ and corresponding low dimensional coordinates $\mathbf{Y}$, we may minimize the sum of squared differences between each vector $\mathbf{x}$ and its reconstruction $\tilde{\mathbf{x}}$:

$\text{E}(\mathbf{B},\mathbf{Y}) = \sum\limits_{n=1}^{\text{N}}\sum\limits_{i=1}^{\text{D}}\left[x_i^n - \sum\limits_{j=1}^{\text{M}}y_j^nb_i^j\right]^2 = \text{trace} \left( (\mathbf{X}-\mathbf{B}\mathbf{Y})^T(\mathbf{X}-\mathbf{B}\mathbf{Y}) \right)$

where $\mathbf{X} = [\mathbf{x}^1,...,\mathbf{x}^\text{N}].$ Considering the above equation under the orthonormality constraint $\mathbf{B}^T\mathbf{B} = \mathbf{I}$ (i.e the basis vectors are mutually orthogonal and of unit length), we differentiate it w.r.t $y_k^n$. The squared error $\text{E}(\mathbf{B},\mathbf{Y})$ therefore has zero derivative when:

$y_k^n = \sum_i b_i^kx_i^n$

By substituting this solution in the above equation, the objective becomes

$\text{E}(\mathbf{B}) = (\text{N}-1)\left[\text{trace}(\mathbf{S}) - \text{trace}\left(\mathbf{S}\mathbf{B}\mathbf{B}^T\right)\right],$

where $\mathbf{S}$ is the sample covariance matrix of the data. To minimise equation under the constraint $\mathbf{B}^T\mathbf{B} = \mathbf{I}$, we use a set of Lagrange Multipliers $\mathbf{L}$, so that the objective is to minimize:

$-\text{trace}\left(\mathbf{S}\mathbf{B}\mathbf{B}^T\right)+\text{trace}\left(\mathbf{L}\left(\mathbf{B}^T\mathbf{B} - \mathbf{I}\right)\right).$

Since the constraint is symmetric, we can assume that $\mathbf{L}$ is also symmetric. Differentiating with respect to $\mathbf{B}$ and equating to zero we obtain that at the optimum

$\mathbf{S}\mathbf{B} = \mathbf{B}\mathbf{L}$.

This is a form of eigen-equation so that a solution is given by taking $\mathbf{L}$ to be diagonal and $\mathbf{B}$ as the matrix whose columns are the corresponding eigenvectors of $\mathbf{S}$. In this case,

$\text{trace}\left(\mathbf{S}\mathbf{B}\mathbf{B}^T\right) =\text{trace}(\mathbf{L}),$

which is the sum of the eigenvalues corresponding to the eigenvectors forming $\mathbf{B}$. Since we wish to minimise $\text{E}(\mathbf{B})$, we take the eigenvectors with the largest corresponding eigenvalues. Whilst the solution to this eigen-problem is unique, this only serves to define the solution subspace since one may rotate and scale $\mathbf{B}$ and $\mathbf{Y}$ such that the value of the squared loss is exactly the same. The justification for choosing the non-rotated eigen solution is given by the additional requirement that the principal components corresponds to directions of maximal variance.

We aim to find that single direction $\mathbf{b}$ such that, when the data is projected onto this direction, the variance of this projection is maximal amongst all possible such projections. The projection of a datapoint onto a direction $\mathbf{b}$ is $\mathbf{b}^T\mathbf{x}^n$ for a unit length vector $\mathbf{b}$. Hence the sum of squared projections is: $$\sum\limits_{n}\left(\mathbf{b}^T\mathbf{x}^n\right)^2 = \mathbf{b}^T\left[\sum\limits_{n}\mathbf{x}^n(\mathbf{x}^n)^T\right]\mathbf{b} = (\text{N}-1)\mathbf{b}^T\mathbf{S}\mathbf{b} = \lambda(\text{N} - 1)$$ which ignoring constants, is simply the negative of the equation for a single retained eigenvector $\mathbf{b}$(with $\mathbf{S}\mathbf{b} = \lambda\mathbf{b}$). Hence the optimal single $\text{b}$ which maximises the projection variance is given by the eigenvector corresponding to the largest eigenvalues of $\mathbf{S}.$ The second largest eigenvector corresponds to the next orthogonal optimal direction and so on. This explains why, despite the squared loss equation being invariant with respect to arbitrary rotation of the basis vectors, the ones given by the eigen-decomposition have the additional property that they correspond to directions of maximal variance. These maximal variance directions found by PCA are called the $\text{principal} $ $\text{directions}.$

There are two eigenvalue methods through which shogun can perform PCA namely

- Eigenvalue Decomposition Method.
- Singular Value Decomposition.

- The EVD viewpoint requires that one compute the eigenvalues and eigenvectors of the covariance matrix, which is the product of $\mathbf{X}\mathbf{X}^\text{T}$, where $\mathbf{X}$ is the data matrix. Since the covariance matrix is symmetric, the matrix is diagonalizable, and the eigenvectors can be normalized such that they are orthonormal:

$\mathbf{S}=\frac{1}{\text{N}-1}\mathbf{X}\mathbf{X}^\text{T},$

where the $\text{D}\times\text{N}$ matrix $\mathbf{X}$ contains all the data vectors: $\mathbf{X}=[\mathbf{x}^1,...,\mathbf{x}^\text{N}].$ Writing the $\text{D}\times\text{N}$ matrix of eigenvectors as $\mathbf{E}$ and the eigenvalues as an $\text{N}\times\text{N}$ diagonal matrix $\mathbf{\Lambda}$, the eigen-decomposition of the covariance $\mathbf{S}$ is

$\mathbf{X}\mathbf{X}^\text{T}\mathbf{E}=\mathbf{E}\mathbf{\Lambda}\Longrightarrow\mathbf{X}^\text{T}\mathbf{X}\mathbf{X}^\text{T}\mathbf{E}=\mathbf{X}^\text{T}\mathbf{E}\mathbf{\Lambda}\Longrightarrow\mathbf{X}^\text{T}\mathbf{X}\tilde{\mathbf{E}}=\tilde{\mathbf{E}}\mathbf{\Lambda},$

where we defined $\tilde{\mathbf{E}}=\mathbf{X}^\text{T}\mathbf{E}$. The final expression above represents the eigenvector equation for $\mathbf{X}^\text{T}\mathbf{X}.$ This is a matrix of dimensions $\text{N}\times\text{N}$ so that calculating the eigen-decomposition takes $\mathcal{O}(\text{N}^3)$ operations, compared with $\mathcal{O}(\text{D}^3)$ operations in the original high-dimensional space. We then can therefore calculate the eigenvectors $\tilde{\mathbf{E}}$ and eigenvalues $\mathbf{\Lambda}$ of this matrix more easily. Once found, we use the fact that the eigenvalues of $\mathbf{S}$ are given by the diagonal entries of $\mathbf{\Lambda}$ and the eigenvectors by

$\mathbf{E}=\mathbf{X}\tilde{\mathbf{E}}\mathbf{\Lambda}^{-1}$

- On the other hand, applying SVD to the data matrix $\mathbf{X}$ follows like:

$\mathbf{X}=\mathbf{U}\mathbf{\Sigma}\mathbf{V}^\text{T}$

where $\mathbf{U}^\text{T}\mathbf{U}=\mathbf{I}_\text{D}$ and $\mathbf{V}^\text{T}\mathbf{V}=\mathbf{I}_\text{N}$ and $\mathbf{\Sigma}$ is a diagonal matrix of the (positive) singular values. We assume that the decomposition has ordered the singular values so that the upper left diagonal element of $\mathbf{\Sigma}$ contains the largest singular value.

Attempting to construct the covariance matrix $(\mathbf{X}\mathbf{X}^\text{T})$from this decomposition gives:

$\mathbf{X}\mathbf{X}^\text{T} = \left(\mathbf{U}\mathbf{\Sigma}\mathbf{V}^\text{T}\right)\left(\mathbf{U}\mathbf{\Sigma}\mathbf{V}^\text{T}\right)^\text{T}$

$\mathbf{X}\mathbf{X}^\text{T} = \left(\mathbf{U}\mathbf{\Sigma}\mathbf{V}^\text{T}\right)\left(\mathbf{V}\mathbf{\Sigma}\mathbf{U}^\text{T}\right)$

and since $\mathbf{V}$ is an orthogonal matrix $\left(\mathbf{V}^\text{T}\mathbf{V}=\mathbf{I}\right),$

$\mathbf{X}\mathbf{X}^\text{T}=\left(\mathbf{U}\mathbf{\Sigma}^\mathbf{2}\mathbf{U}^\text{T}\right)$

Since it is in the form of an eigen-decomposition, the PCA solution given by performing the SVD decomposition of $\mathbf{X}$, for which the eigenvectors are then given by $\mathbf{U}$, and corresponding eigenvalues by the square of the singular values.

CPCA class of Shogun inherits from the CPreprocessor class. Preprocessors are transformation functions that doesn't change the domain of the input features. Specifically, CPCA performs principal component analysis on the input vectors and keeps only the specified number of eigenvectors. On preprocessing, the stored covariance matrix is used to project vectors into eigenspace.

Performance of PCA depends on the algorithm used according to the situation in hand. Our PCA preprocessor class provides 3 method options to compute the transformation matrix:

- $\text{PCA(EVD)}$ sets $\text{PCAmethod == EVD}$ : Eigen Value Decomposition of Covariance Matrix $(\mathbf{XX^T}).$ The covariance matrix $\mathbf{XX^T}$ is first formed internally and then its eigenvectors and eigenvalues are computed using QR decomposition of the matrix. The time complexity of this method is $\mathcal{O}(D^3)$ and should be used when $\text{N > D.}$

- $\text{PCA(SVD)}$ sets $\text{PCAmethod == SVD}$ : Singular Value Decomposition of feature matrix $\mathbf{X}$. The transpose of feature matrix, $\mathbf{X^T}$, is decomposed using SVD. $\mathbf{X^T = UDV^T}.$ The matrix V in this decomposition contains the required eigenvectors and the diagonal entries of the diagonal matrix D correspond to the non-negative eigenvalues.The time complexity of this method is $\mathcal{O}(DN^2)$ and should be used when $\text{N < D.}$

- $\text{PCA(AUTO)}$ sets $\text{PCAmethod == AUTO}$ : This mode automagically chooses one of the above modes for the user based on whether $\text{N>D}$ (chooses $\text{EVD}$) or $\text{N

In [2]:

```
#number of data points.
n=100
#generate a random 2d line(y1 = mx1 + c)
m = random.randint(1,10)
c = random.randint(1,10)
x1 = random.random_integers(-20,20,n)
y1=m*x1+c
#generate the noise.
noise=random.random_sample([n]) * random.random_integers(-35,35,n)
#make the noise orthogonal to the line y=mx+c and add it.
x=x1 + noise*m/sqrt(1+square(m))
y=y1 + noise/sqrt(1+square(m))
twoD_obsmatrix=array([x,y])
```

In [3]:

```
#to visualise the data we must plot it.
rcParams['figure.figsize'] = 7, 7
figure,axis=subplots(1,1)
xlim(-50,50)
ylim(-50,50)
axis.plot(twoD_obsmatrix[0,:],twoD_obsmatrix[1,:],'o',color='green',markersize=6)
#the line from which we generated the data is plotted in red
axis.plot(x1[:],y1[:],linewidth=0.3,color='red')
title('One-Dimensional sub-space with noise')
xlabel("x axis")
_=ylabel("y axis")
```

In [4]:

```
#convert the observation matrix into dense feature matrix.
train_features = RealFeatures(twoD_obsmatrix)
#PCA(EVD) is choosen since N=100 and D=2 (N>D).
#However we can also use PCA(AUTO) as it will automagically choose the appropriate method.
preprocessor = PCA(EVD)
#since we are projecting down the 2d data, the target dim is 1. But here the exhaustive method is detailed by
#setting the target dimension to 2 to visualize both the eigen vectors.
#However, in future examples we will get rid of this step by implementing it directly.
preprocessor.set_target_dim(2)
#Centralise the data by subtracting its mean from it.
preprocessor.init(train_features)
#get the mean for the respective dimensions.
mean_datapoints=preprocessor.get_mean()
mean_x=mean_datapoints[0]
mean_y=mean_datapoints[1]
```

To understand the relationship between 2 dimension we define $\text{covariance}$. It is a measure to find out how much the dimensions vary from the mean $with$ $respect$ $to$ $each$ $other.$$$cov(X,Y)=\frac{\sum\limits_{i=1}^{n}(X_i-\bar{X})(Y_i-\bar{Y})}{n-1}$$ A useful way to get all the possible covariance values between all the different dimensions is to calculate them all and put them in a matrix.

Example: For a 3d dataset with usual dimensions of $x,y$ and $z$, the covariance matrix has 3 rows and 3 columns, and the values are this: $$\mathbf{S} = \quad\begin{pmatrix}cov(x,x)&cov(x,y)&cov(x,z)\\cov(y,x)&cov(y,y)&cov(y,z)\\cov(z,x)&cov(z,y)&cov(z,z)\end{pmatrix}$$

Find the eigenvectors $e^1,....e^M$ of the covariance matrix $\mathbf{S}$.

In [5]:

```
#Get the eigenvectors(We will get two of these since we set the target to 2).
E = preprocessor.get_transformation_matrix()
#Get all the eigenvalues returned by PCA.
eig_value=preprocessor.get_eigenvalues()
e1 = E[:,0]
e2 = E[:,1]
eig_value1 = eig_value[0]
eig_value2 = eig_value[1]
```

In [6]:

```
#find out the M eigenvectors corresponding to top M number of eigenvalues and store it in E
#Here M=1
#slope of e1 & e2
m1=e1[1]/e1[0]
m2=e2[1]/e2[0]
#generate the two lines
x1=range(-50,50)
x2=x1
y1=multiply(m1,x1)
y2=multiply(m2,x2)
```

In [7]:

```
#plot the data along with those two eigenvectors
figure, axis = subplots(1,1)
xlim(-50, 50)
ylim(-50, 50)
axis.plot(x[:], y[:],'o',color='green', markersize=5, label="green")
axis.plot(x1[:], y1[:], linewidth=0.7, color='black')
axis.plot(x2[:], y2[:], linewidth=0.7, color='blue')
p1 = Rectangle((0, 0), 1, 1, fc="black")
p2 = Rectangle((0, 0), 1, 1, fc="blue")
legend([p1,p2],["1st eigenvector","2nd eigenvector"],loc='center left', bbox_to_anchor=(1, 0.5))
title('Eigenvectors selection')
xlabel("x axis")
_=ylabel("y axis")
```

In [8]:

```
#The eigenvector corresponding to higher eigenvalue(i.e eig_value2) is choosen (i.e e2).
#E is the feature vector.
E=e2
```

This is the final step in PCA. Once we have choosen the components(eigenvectors) that we wish to keep in our data and formed a feature vector, we simply take the vector and multiply it on the left of the original dataset. The lower dimensional representation of each data point $\mathbf{x}^n$ is given by

$\mathbf{y}^n=\mathbf{E}^T(\mathbf{x}^n-\mathbf{m})$

Here the $\mathbf{E}^T$ is the matrix with the eigenvectors in rows, with the most significant eigenvector at the top. The mean adjusted data, with data items in each column, with each row holding a seperate dimension is multiplied to it.

Step 6 can be performed by shogun's PCA preprocessor as follows:

The transformation matrix that we got after $\text{init()}$ is used to transform all $\text{D-dim}$ feature matrices (with $\text{D}$ feature dimensions) supplied, via $\text{apply_to_feature_matrix methods}$.This transformation outputs the $\text{M-Dim}$ approximation of all these input vectors and matrices (where $\text{M}$ $\leq$ $\text{min(D,N)}$).

In [9]:

```
#transform all 2-dimensional feature matrices to target-dimensional approximations.
yn=preprocessor.apply_to_feature_matrix(train_features)
#Since, here we are manually trying to find the eigenvector corresponding to the top eigenvalue.
#The 2nd row of yn is choosen as it corresponds to the required eigenvector e2.
yn1=yn[1,:]
```

In [10]:

```
x_new=(yn1 * E[0]) + tile(mean_x,[n,1]).T[0]
y_new=(yn1 * E[1]) + tile(mean_y,[n,1]).T[0]
```

The new data is plotted below

In [11]:

```
figure, axis = subplots(1,1)
xlim(-50, 50)
ylim(-50, 50)
axis.plot(x[:], y[:],'o',color='green', markersize=5, label="green")
axis.plot(x_new, y_new, 'o', color='blue', markersize=5, label="red")
title('PCA Projection of 2D data into 1D subspace')
xlabel("x axis")
ylabel("y axis")
#add some legend for information
p1 = Rectangle((0, 0), 1, 1, fc="r")
p2 = Rectangle((0, 0), 1, 1, fc="g")
p3 = Rectangle((0, 0), 1, 1, fc="b")
legend([p1,p2,p3],["normal projection","2d data","1d projection"],loc='center left', bbox_to_anchor=(1, 0.5))
#plot the projections in red:
for i in range(n):
axis.plot([x[i],x_new[i]],[y[i],y_new[i]] , color='red')
```

In [12]:

```
rcParams['figure.figsize'] = 8,8
#number of points
n=100
#generate the data
a=random.randint(1,20)
b=random.randint(1,20)
c=random.randint(1,20)
d=random.randint(1,20)
x1=random.random_integers(-20,20,n)
y1=random.random_integers(-20,20,n)
z1=-(a*x1+b*y1+d)/c
#generate the noise
noise=random.random_sample([n])*random.random_integers(-30,30,n)
#the normal unit vector is [a,b,c]/magnitude
magnitude=sqrt(square(a)+square(b)+square(c))
normal_vec=array([a,b,c]/magnitude)
#add the noise orthogonally
x=x1+noise*normal_vec[0]
y=y1+noise*normal_vec[1]
z=z1+noise*normal_vec[2]
threeD_obsmatrix=array([x,y,z])
```

In [13]:

```
#to visualize the data, we must plot it.
from mpl_toolkits.mplot3d import Axes3D
fig = pyplot.figure()
ax=fig.add_subplot(111, projection='3d')
#plot the noisy data generated by distorting a plane
ax.scatter(x, y, z,marker='o', color='g')
ax.set_xlabel('x label')
ax.set_ylabel('y label')
ax.set_zlabel('z label')
legend([p2],["3d data"],loc='center left', bbox_to_anchor=(1, 0.5))
title('Two dimensional subspace with noise')
xx, yy = meshgrid(range(-30,30), range(-30,30))
zz=-(a * xx + b * yy + d) / c
```

In [14]:

```
#convert the observation matrix into dense feature matrix.
train_features = RealFeatures(threeD_obsmatrix)
#PCA(EVD) is choosen since N=100 and D=3 (N>D).
#However we can also use PCA(AUTO) as it will automagically choose the appropriate method.
preprocessor = PCA(EVD)
#If we set the target dimension to 2, Shogun would automagically preserve the required 2 eigenvectors(out of 3) according to their
#eigenvalues.
preprocessor.set_target_dim(2)
preprocessor.init(train_features)
#get the mean for the respective dimensions.
mean_datapoints=preprocessor.get_mean()
mean_x=mean_datapoints[0]
mean_y=mean_datapoints[1]
mean_z=mean_datapoints[2]
```

In [15]:

```
#get the required eigenvectors corresponding to top 2 eigenvalues.
E = preprocessor.get_transformation_matrix()
```

In [16]:

```
#This can be performed by shogun's PCA preprocessor as follows:
yn=preprocessor.apply_to_feature_matrix(train_features)
```

In [17]:

```
new_data=dot(E,yn)
x_new=new_data[0,:]+tile(mean_x,[n,1]).T[0]
y_new=new_data[1,:]+tile(mean_y,[n,1]).T[0]
z_new=new_data[2,:]+tile(mean_z,[n,1]).T[0]
```

In [18]:

```
#all the above points lie on the same plane. To make it more clear we will plot the projection also.
fig=pyplot.figure()
ax=fig.add_subplot(111, projection='3d')
ax.scatter(x, y, z,marker='o', color='g')
ax.set_xlabel('x label')
ax.set_ylabel('y label')
ax.set_zlabel('z label')
legend([p1,p2,p3],["normal projection","3d data","2d projection"],loc='center left', bbox_to_anchor=(1, 0.5))
title('PCA Projection of 3D data into 2D subspace')
for i in range(100):
ax.scatter(x_new[i], y_new[i], z_new[i],marker='o', color='b')
ax.plot([x[i],x_new[i]],[y[i],y_new[i]],[z[i],z_new[i]],color='r')
```

The problem with the image representation we are given is its high dimensionality. Two-dimensional $\text{p} \times \text{q}$ grayscale images span a $\text{m=pq}$ dimensional vector space, so an image with $\text{100}\times\text{100}$ pixels lies in a $\text{10,000}$ dimensional image space already.

The question is, are all dimensions really useful for us?

$\text{Eigenfaces}$ are based on the dimensional reduction approach of $\text{Principal Component Analysis(PCA)}$. The basic idea is to treat each image as a vector in a high dimensional space. Then, $\text{PCA}$ is applied to the set of images to produce a new reduced subspace that captures most of the variability between the input images. The $\text{Pricipal Component Vectors}$(eigenvectors of the sample covariance matrix) are called the $\text{Eigenfaces}$. Every input image can be represented as a linear combination of these eigenfaces by projecting the image onto the new eigenfaces space. Thus, we can perform the identfication process by matching in this reduced space. An input image is transformed into the $\text{eigenspace,}$ and the nearest face is identified using a $\text{Nearest Neighbour approach.}$

Here data means those Images which will be used for training purposes.

In [19]:

```
rcParams['figure.figsize'] = 10, 10
import os
def get_imlist(path):
""" Returns a list of filenames for all jpg images in a directory"""
return [os.path.join(path,f) for f in os.listdir(path) if f.endswith('.pgm')]
#set path of the training images
path_train='../../../data/att_dataset/training/'
#set no. of rows that the images will be resized.
k1=100
#set no. of columns that the images will be resized.
k2=100
filenames = get_imlist(path_train)
filenames = array(filenames)
#n is total number of images that has to be analysed.
n=len(filenames)
```

Lets have a look on the data:

In [20]:

```
# we will be using this often to visualize the images out there.
def showfig(image):
imgplot=imshow(image, cmap='gray')
imgplot.axes.get_xaxis().set_visible(False)
imgplot.axes.get_yaxis().set_visible(False)
import Image
from scipy import misc
# to get a hang of the data, lets see some part of the dataset images.
fig = pyplot.figure()
title('The Training Dataset')
for i in range(49):
fig.add_subplot(7,7,i+1)
train_img=array(Image.open(filenames[i]).convert('L'))
train_img=misc.imresize(train_img, [k1,k2])
showfig(train_img)
```